2010 Jeep Commander Owner's Manual - Page 179
2010 Jeep Commander Manual
Page 179 highlights
UNDERSTANDING YOUR INSTRUMENT PANEL 179 the FUNCTION SELECT button for two seconds. Current NOTE: A good calibration requires a level surface and an environment free from large metallic objects such as display will reset along with other functions buildings, bridges, underground cables, railroad tracks, Compass Display etc. The compass readings indicate the direction the vehicle is facing. Press and release the Manual Compass Calibration COMPASS/TEMPERATURE button to display If the compass appears erratic and the "CAL" indicator one of eight compass readings and the outside does not appear in the EVIC display, you must put the compass into the Calibration Mode manually as follows: temperature. Automatic Compass Calibration When the vehicle is new, the compass may appear erratic and the EVIC will display "CAL" until the compass is calibrated. To complete the calibration process, drive slowly 5 mph (8 km/h) in one or more complete circles in an area, free from magnetic material until the CAL indicator displayed in the EVIC turns off. 1. Turn on the ignition switch. 2. Press the MENU button until Personal Settings (Customer-Programmable Features) menu is reached. 3. Press the SCROLL button until "Calibrate Compass" is displayed in the EVIC. 4. Press and release the FUNCTION SELECT button to start the calibration. The "CAL" indicator will flash in the EVIC. 4