2010 Jeep Commander Owner's Manual - Page 163
2010 Jeep Commander Manual
Page 163 highlights
UNDERSTANDING YOUR INSTRUMENT PANEL 163 6. Airbag Warning Light This light turns on and remains on for six to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is not on during starting, stays on, or turns on while driving, have the system inspected by an authorized dealer as soon as possible. If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes. If the ABS light does not turn on when the Ignition switch is turned to the ON position, have the light inspected by an authorized dealer. 8. Tachometer Indicates the engine speed in revolutions per minute (RPM). 7. Anti-Lock Brake (ABS) Light This light monitors the Anti-Lock Brake System 9. Vehicle Security Light (ABS). The light will turn on when the ignition This light will flash rapidly for approximately switch is turned to the ON position and may 15 seconds when the vehicle theft alarm is stay on for as long as four seconds. arming. The light will flash at a slower speed continuously after the alarm is set. The security If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system light will also come on for about three seconds when the is not functioning and that service is required. However, ignition is first turned on. the conventional brake system will continue to operate normally if the BRAKE warning light is not on. 4