2010 Jeep Commander Owner's Manual - Page 24

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using the Panic Alarm To turn the Panic Alarm feature on or off, press and hold the PANIC button on the RKE transmitter for at least one second and release. When the Panic Alarm is on, the headlights and park lamps will flash, the horn will pulse on and off, and the interior lights will turn on. Programming Additional Transmitters If you do not have a programmed RKE transmitter, contact your authorized dealer for details. Transmitter Battery Service The recommended replacement battery is one CR2032 battery. The Panic Alarm will stay on for three minutes unless NOTE: you turn it off by either pressing the PANIC button a • Perchlorate Material - special handling may apply. second time, or drive the vehicle at a speed of 15 mph See www.dtsc.ca.gov/hazardouswaste/perchlorate (24 km/h) or greater. • Do not touch the battery terminals that are on the back NOTE: housing or the printed circuit board. • The interior lights will turn off if you turn the ignition switch to the ACC or ON position while the Panic 1. Battery access is through a door located on the rear of Alarm is activated. However, the exterior lamps and the fob. Insert a small, flat blade screwdriver into the slot horn will remain on. and gently pry open the access door.