2010 Jeep Commander Owner's Manual - Page 235

UNDERSTANDING YOUR INSTRUMENT PANEL 235 Panel Rear Temperature Control Air flows through the outlets located in the rear The center knob on the Rear Control Panel allows the quarter trim panels. These registers can be closed to third row seat occupants to have control of the rear block airflow. temperature as follows: • When the temperature knob is in the cold (Blue) Operating Tips position, cold air will be delivered from the outlets. As Window Fogging the temperature knob is turned towards the hot (Red) Windows will fog on the inside when the humidity inside position, the air will get warmer. the vehicle is high. This often occurs in mild or cool Rear Mode Control temperatures when it's rainy or humid. In most cases, turning on the air conditioning (pressing the snowflake Floor button) will clear the fog. Adjust the temperature control, Air flows through the floor outlet located on the air direction and blower speed to maintain comfort. right side of the rear floor into the rear seating area. As the temperature gets colder, it may be necessary to Bi-Level direct air onto the windshield. Adjust the temperature Air flows through both the outlets located in the control and blower speed to maintain comfort. Higher rear quarter trim panels, and the one located on the blower speeds will reduce fogging. Interior fogging on floor. The rear quarter trim panel outlets can be closed to the windshield can be quickly removed by selecting the block airflow. defrost mode. 4