2010 Jeep Commander Owner's Manual - Page 32

32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Up Feature with Anti-Pinch Protection - Driver's and Front Passenger Door Only Lift the window switch to the second detent, release, and the window will go up automatically. To stop the window from going all the way up during the Auto Up operation, push down on the switch briefly. WARNING! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. Resetting the Auto Up Feature To close the window part way, lift the window switch to Should the Auto Up feature stop working, the window the first detent and release when you want the window to probably needs to be reset. To reset Auto Up, pull the stop. window switch up and close the window completely, then pull and hold the switch for one second. NOTE: If the window runs into any obstacle during the auto-closure, it will reverse direction and then go back Window Lockout Button down. Remove the obstacle and use the window switch The Window Lockout button on the driver's door allows again to close the window. Any impact due to rough road you to disable the window control on the other doors. To conditions may trigger the auto reverse function unex- disable the window controls on the other doors, press the pectedly during auto closure. If this happens, pull the Window Lockout button. To enable the window controls, switch lightly to the first detent and hold to close the press the Window Lockout button again. window manually.