Belkin F5D8230-4 User Manual - Page 105
Changing the wireless channel, Limiting the wireless transmit rate - wireless access point
View all Belkin F5D8230-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Troubleshooting Problem: 1 • My wireless network performance is inconsistent. 2 • Data transfer is sometimes slow. • Signal strength is poor. 3 • Difficulty establishing and/or maintaining a Virtual Private Network (VPN) connection. 4 Solution: 5 Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases. Other factors that will 6 cause signal degradation (metal is generally the worst culprit) are obstructions such as walls and metal appliances. Note also that 7 connection speed may decrease as you move farther away from the Router (or Access Point). In order to determine if wireless issues are related to range, we 8 suggest temporarily moving the computer, if possible, five to 10 feet from the Router. 9 Changing the wireless channel-Depending on local wireless traffic and interference, switching the wireless channel of your network can improve performance and reliability. The default 10 channel the Router is shipped with is channel 11; you may choose from several other channels depending on your region. See the 11 section on page 48 entitled "Changing the Wireless Channel" for instructions on how to choose other channels. Limiting the wireless transmit rate-Limiting the wireless transmit rate can help improve the maximum wireless range and connection stability. Most wireless cards have the ability to limit the transmission rate. To change this property, go to the Windows Control Panel, open "Network Connections" and double-click on your wireless card's connection. In the properties dialog, select the "Configure" button on the "General" tab (Windows 98 users will have to select the wireless card in the list box and then click "Properties"), then choose the "Advanced" tab and select the rate property. section 103