Belkin F5D8230-4 User Manual - Page 51
Using the Broadcast SSID Feature, Protected Mode Switch, QoS Quality of Service Configuration
View all Belkin F5D8230-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
section Using the Web-Based Advanced User Interface Using the Broadcast SSID Feature 1 Note: This advanced feature should be employed by advanced users only. For security, you can choose not to broadcast your 2 network's SSID. Doing so will keep your network name hidden from computers that are scanning for the presence of wireless networks. To turn off the broadcast of the SSID, remove the check mark from the 3 box next to "Broadcast SSID", and then click "Apply Changes". The change is immediate. Each computer now needs to be set to connect 4 to your specific SSID; an SSID of "ANY" will no longer be accepted. Refer to the documentation of your wireless network adapter for information on making this change. 5 Protected Mode Switch 6 Protected mode will ensure proper operation of 802.11g devices on your Pre-N network when 802.11b devices are present or when there is heavy 802.11b traffic in the operating environment. If you are using 7 a mix of Belkin Pre-N Wireless Cards and 802.11b or 802.11g cards on your network, protected mode should be used. If you are in an 8 environment where there is no other (or very little) 802.11b wireless network traffic, best 802.11g performance may be achieved with protected mode OFF. If you are operating in an environment with 9 HEAVY 802.11b traffic or interference, best 802.11g performance may be achieved with protected mode ON. Wireless Pre-N performance is 10 not affected by this setting. QoS (Quality of Service) Configuration 11 QoS prioritizes important data on your network such as multimedia content and Voice over IP (VoIP) so it will not be interfered with by other data being sent over the network. Based on 802.11e, this feature can be turned on or off and you can choose the acknowledgement mode you want to use. If you plan to stream multimedia content or use VoIP on your network, the QoS feature should be enabled. 49