Brother International 9840CDW Users Manual - English - Page 129
Installing extra memory
UPC - 012502618744
View all Brother International 9840CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Installing extra memory B a Turn off the machine's power switch. Unplug the telephone line cord. b Disconnect the interface cable from the machine, and then unplug the power cord from the AC power outlet. c Remove the DIMM covers (1 and 2). 2 1 d Unpack the DIMM and hold it by its edges. CAUTION To prevent damage to the machine from static electricity, DO NOT touch the memory chips or the board surface. Options f Put the DIMM covers (2 and 1) back on. 2 B 1 g Plug the machine's power cord back into the AC power outlet first, and then connect the interface cable. h Plug in the telephone line cord. Turn on the machine's power switch. Note To make sure that you have installed the SO-DIMM properly, you can print the user settings page that shows the current memory size. (See Reports on page 75.) e Hold the DIMM by the edges and align the notches in the DIMM with the protrusions in the slot. Insert the DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2). 1 2 113