Brother International 9840CDW Users Manual - English - Page 153
Black Start, Color Start, Stop/Exit, Error Message, Cause, Action, Registration, Rename the File - end of toner life
UPC - 012502618744
View all Brother International 9840CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Troubleshooting and routine maintenance Error Message Cause Action Registration Registration failed. Press Black Start or Color Start and try again. Do one of the following: Try Manual Registration, Menu, 4, 8. (See Manual Registration in the Software User's Guide on the CD-ROM.) Put in a new belt unit. (See Replacing the belt unit on page 183.) C Put in a new drum unit. (See Replacing the drum unit on page 177.) Replace the empty toner cartridge with a new one. (See Replacing a toner cartridge on page 172.) Turn off the machine's power switch. Wait a few seconds, then turn it on again. If the problem continues, call Brother Customer Service. Rename the File There is already a file on the USB flash memory drive with the same name as the file you are trying to save. Change the file name of the file on the USB flash memory drive or the file you are trying to save. Scan Unable XX The machine has a mechanical problem. Turn off the machine's power switch and then turn it on again. If the error message continues leave the machine for several minutes before you try it again. The machine can be turned off for up to 4 days without losing faxes stored in the memory. (See Checking if the machine has faxes in its memory on page 139.) Document is too long for duplex Press Stop/Exit. Use a suitable size of paper for scanning. duplex scanning. (See Scan on page 229.) Scanner Locked The scanner lock is locked. Open the document cover, and then release the scanner lock lever. Press Stop/Exit. Toner Life End Replace Black(K) Toner Cartridge. 1 1 The toner cartridge color which is used up is shown in the message. The drum unit and toner cartridges assembly is not installed properly, or one or more of the toner cartridges are used up and printing is not possible. Do one of the following: Re-install the toner cartridges and drum unit assembly. Replace the empty toner cartridge with a new one. (See Replacing a toner cartridge on page 172.) If one of the color toner cartridges is empty, choose Mono in the printer driver to be able to continue printing in monochrome. 137