Brother International 9840CDW Users Manual - English - Page 36
Loading documents, Using the ADF (automatic document feeder), Using the ADF automatic, document feeder
UPC - 012502618744
View all Brother International 9840CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 2 Loading documents 2 You can send a fax, make copies, and scan from the ADF (automatic document feeder) and from the scanner glass. Using the ADF (automatic document feeder) 2 The ADF can hold up to 50 pages and feeds each sheet individually. Use standard 20 lb (80 g/m2) paper and always fan the pages before putting them in the ADF. CAUTION DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam. DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper-clipped, pasted or taped. DO NOT use cardboard, newspaper or fabric. a Unfold the ADF document output support flap (1) and the ADF support flap (2). 2 1 b Fan the pages well. c Place your document, face up top edge first, in the ADF until you feel it touch the feed roller. The LCD will show ADF Ready. d Adjust the paper guides to fit the width of your document. Make sure documents written with ink are completely dry. Single-sided document 2 Documents to be faxed must be from 5.8 to 8.5 inches (147.3 to 215.9 mm) wide and from 5.8 to 14 inches (147.3 to 356 mm) long, and of a standard weight [20 lb (80 g/m2)]. 2-sided document 2 When you load a 2-sided document, the document to be faxed must be from 5.8 to 8.5 inches (147.3 to 215.9 mm) wide and from 5.8 to 11.7 inches (147.3 to 297 mm) long, and of a standard weight [20 lb (80 g/m2)]. CAUTION To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding. To scan non-standard documents see Using the scanner glass on page 21. 20