Brother International 9840CDW Users Manual - English - Page 26
Machine Status, Description, When the power switch is off or the machine is in Sleep mode - fuser
UPC - 012502618744
View all Brother International 9840CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 1 LED Machine Status Sleep Mode Warming Up Description The power switch is off or the machine is in Sleep mode. The machine is warming up for printing. Green Green Ready Receiving Data Yellow Yellow Data Remaining in Memory Service error Red Cover open Red Toner Life End Paper error Scan lock Others Out of memory The machine is ready to print. The machine is either receiving data from the computer, processing data in memory, or printing data. Print data remains in the machine memory. Follow the steps below. 1. Turn off the power switch. 2. Wait a few seconds, and then turn it back on and try to print again. If you cannot clear the error and you see the same service call indication after turning the machine back on, please call Brother Customer Service. (See Brother numbers on page i.) The front cover or fuser cover is open. Close the cover. Replace the toner cartridge with a new one. Put paper in the tray or clear the paper jam. Check the LCD message. Check that the scanner lock lever is released. Check the LCD message. Memory is full. Note When the power switch is off or the machine is in Sleep mode, the LED is off. 10