Brother International ADS-2500We Network Users Guide - Page 12
Confirm Your Network Environment
View all Brother International ADS-2500We manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Configuring Your Machine for a Wireless Network Confirm Your Network Environment 3 Connected to a Computer with a WLAN Access Point/Router in the Network (Infrastructure Mode) 3 3 1 5 4 2 3 1 WLAN access point/router 1 1 If your computer supports Intel ® My WiFi Technology (MWT), you can use your computer as a Wi-Fi Protected Setup (WPS) supported access point. 2 Wireless network machine (your machine) 3 Wireless-capable computer connected to the WLAN access point/router 4 Wired computer (that is not wireless-capable) connected to the WLAN access point/router with a network cable 5 Mobile Device connected to the wireless access point/router Configuration Method 3 The following are different methods for configuring your Brother machine in a wireless network environment. Choose the method you prefer for your environment. Wireless configuration temporarily using a USB cable (Recommended). See the Quick Setup Guide. One push wireless configuration using WPS (Wi-Fi Protected Setup) or AOSS™. See page 17. PIN Method wireless configuration using WPS. See page 19. How to Check the WLAN Status 3 1 On your machine's LCD, press . 2 Press Network. 3 Press WLAN. 4 Press a or b and then press WLAN Status. 5 Press Status. 9