Brother International ADS-2500We Network Users Guide - Page 62

Troubleshooting I cannot complete the wireless network setup configuration. 7 Question Interface Solution Did your machine fail to connect to the network during wireless setup? wireless Turn your wireless router off and back on. Then try and configure the wireless settings again. Are your security settings (SSID/Network Key) correct? wireless Confirm your security settings.  The manufacturer's name or model number of the WLAN access point/router may be used as the default security settings.  See the instructions supplied with your WLAN access point/router for information on how to find the security settings.  Ask the manufacturer of your WLAN access point/router, your Internet provider, or your network administrator. Are you using MAC address wireless Confirm that the Brother machine's MAC address is allowed by the filter. filtering? You can find the MAC address using the the Brother machine's control panel. 7 Is your WLAN access wireless  Type the correct SSID name manually. point/router in stealth mode (not broadcasting the SSID)?  Check the SSID name or the Network Key in the instructions supplied with your WLAN access point/router and reconfigure the wireless network setup. (For more information, see When the SSID Is Not Broadcasting on page 11.) I have checked and tried all of the above, but still cannot complete the wireless configuration. Is there anything else I can do? wireless Use the Network Connection Repair Tool. See The Brother machine cannot scan over the network. The Brother machine is not found on the network even after successful installation. on page 61. 59