Brother International DCP1000 Users Manual - English - Page 100
Cooling Down, Wait For A, While, Wait For A While, Cover Open, Pls Close, Cover, Check Original - dcp printer drivers
UPC - 012502565796
View all Brother International DCP1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
ERROR MESSAGE CAUSE ACTION COOLING DOWN WAIT FOR A WHILE The temperature of the drum unit or toner cartridge is too hot. The machine will pause its current print job and go into cooling down mode. During the cooling down mode, you will hear the cooling fan running while the LCD shows COOLING DOWN and WAIT FOR A WHILE. You must wait and allow the DCP to resume printing when it is ready. COVER OPEN PLS CLOSE COVER The scanner cover was Open, then close the not completely closed. cover. CHECK ORIGINAL Originals were not Do not pull out the inserted or fed properly or jammed original until original was too long. you see page 13-4. DOC. COVER OPEN The document cover is open. Remove any paper from the ADF and close the document cover. MACHINE ERROR The DCP has a XX mechanical problem. Turn off the power. Then call Brother Customer Service: In USA: 1-800-284-4329 In Canada: 1-800-853-6660 In Montreal: 1-514-685-6464 OUT OF MEMORY (May occur when the DCP is used as a printer.) DCP memory capacity has been exceeded. Turn off the power, and then turn it back on. Data remaining in the memory of the DCP will be deleted. • If you have installed the Windows® driver, try again after setting the True Type mode to "Print as Graphics" in the PRINT menu of your application software. • Reduce the print resolution or reduce the complexity of your document. 13 - 2 T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E