Brother International Innov-ís 950D Users Manual - English - Page 114
Thread cutter button once.
View all Brother International Innov-ís 950D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
UTILITY STITCHES Memo z When lowering the presser foot, do not push in the front of the presser foot, otherwise the darning will not be sewn with the correct size. Gently hold the end of the upper thread in f your left hand, and then start sewing. a a Do not reduce the gap. Pull down the buttonhole lever as far as e possible. a a Buttonhole lever The buttonhole lever is positioned behind the bracket on the buttonhole foot. a b a Buttonhole lever b Bracket X Once sewing is completed, the sewing machine automatically sews reinforcement stitches, then stops. Press (Thread cutter button) once. g a a Thread cutter button X The threads are cut and the needle is raised. Raise the presser foot lever, and then remove h the fabric. Memo z If programmed thread-cutting is set, the sewing machine will sew reinforcement stitching, and then cut the thread automatically at the end of the stitching. Refer to "Automatically cutting the thread" (page 65). z When you cut the threads by using the thread cutter on the side of the machine or scissors, first press (Needle position button) once to raise the needle, then raise the presser foot lever and pull the fabric to the left side of the machine, and then cut the threads. Refer to "Using the thread cutter" (page 60). Raise the buttonhole lever to its original i position. Memo z If the fabric does not feed, for example, because it is too thick, increase the stitch length. For details, refer to "Adjusting the stitch length" (page 62). 112