Brother International Innov-ís 950D Users Manual - English - Page 127

Realigning the pattern The pattern may not be sewn correctly, depending on the type of fabric being sewn or the sewing speed. If this occurs, adjust the pattern while sewing on a piece of scrap fabric that is the same as that used for your project. Check the sewn pattern. e If the part of the pattern indicated in the illustration is sewn uniformly, the pattern is correctly aligned. Memo z Only the eyelet stitch in the utility stitches, cross-stitches, and character stitches can be adjusted using the pattern alignment stitch. Attach monogramming foot "N". a If the pattern is not sewn correctly, follow the steps below to adjust the sewing. Press f panel. (Settings key) on the operation 3 • For details, refer to "Replacing the presser foot" (page 43). Press (Utility stitch key) on the b operation panel, and select (Decorative stitch). X The settings screen appears. Press g adjustment. for vertical pattern X The screen containing the various decorative stitches appears. Select . c X The pattern alignment stitch is selected. Start sewing. d X Make the necessary adjustments according to how the pattern is sewn. Press to increase the vertical space in the design. X The pattern for making the adjustment is sewn. X The sewing machine stops after sewing the pattern has finished. Sewing the Various Built-in Decorative Patterns 125