Brother International Innov-ís 950D Users Manual - English - Page 140

EMBROIDERY Attaching the Embroidery Foot This section describes how to attach the embroidery foot "Q". Attaching the embroidery foot Attach the embroidery foot "Q" when embroidering. Have the included embroidery foot "Q" and a screwdriver ready. Turn off the sewing machine. b a b a Embroidery foot bar b Caught by the presser foot holder screw CAUTION ● Always use the embroidery foot "Q" when embroidering. If the wrong presser foot is used, the needle may hit the presser foot and bend or break. Press (Needle position button) once or a twice to raise the needle. a CAUTION z Before attaching the embroidery foot, be sure to turn off the sewing machine. Otherwise, injuries may occur if one of the operation buttons is accidentally pressed and the machine starts sewing. Raise the presser foot lever. c a a Presser foot lever X The presser foot is raised. Press and hold the black button on the back of d the presser foot holder to detach the presser foot. a a Needle position button Note z The needle is correctly raised when the mark on the handwheel is at the top. Check the handwheel mark is at the top position. b a Black button b Presser foot holder X The presser foot holder releases the presser foot. 138