Brother International Innov-ís 950D Users Manual - English - Page 49
reinstall the flat bed attachment to its original
View all Brother International Innov-ís 950D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Raise up the two legs on the reverse side of the b extension table until they click. Turn back the extension table, and then store e the two legs in their original positions. 1 Attach the extension table to the sewing c machine arm. Keep the extension table horizontal and push it in slowly until it stops. Memo ● When you do not use the extension table, use it as the cover of the embroidery unit. Memo ● If the extension table is not stable or its height is improper, adjust its height by turning the rubber ends of legs. When you have finished sewing, remove the d extension table by pulling it to the left. Then reinstall the flat bed attachment to its original position. Sewing Cylindrical Pieces and Large Pieces 47
Sewing Cylindrical Pieces and Large Pieces
47
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
b
Raise up the two legs on the reverse side of the
extension table until they click.
c
Attach the extension table to the sewing
machine arm.
Keep the
extension table horizontal and push it
in slowly until it stops.
Memo
●
If the extension table is not stable or its
height is improper, adjust its height by
turning the rubber ends of legs.
d
When you have finished sewing, remove the
extension table by pulling it to the left. Then
reinstall the flat bed attachment to its original
position.
e
Turn back the extension table, and then store
the two legs in their original positions.
Memo
●
When you do not use the extension table,
use it as the cover of the embroidery unit.