Brother International Innov-ís 950D Users Manual - English - Page 169

Thread runs out partway through a design When the upper thread or the bobbin thread runs out while sewing, the sewing machine stops. Move the needle back about 10 stitches and resume sewing. Memo z When the bobbin thread runs out, cut the threads and remove the embroidery frame before replacing the bobbin thread. Set the upper thread or bobbin thread. a Press . b Stopping while embroidering If the embroidery is stopped before it is complete, check the current needle count and layout before turning off the sewing machine. Memo z When the sewing machine is turned off, the embroidery size and layout return to the original setting. If you have changed the layout, you need to adjust it again. Press (Start/stop button) to stop the a sewing machine. Check the current needle count on the screen b and make a note of it. Memo z If the needle count is not displayed, display the needle count on the screen. For details, refer to "Stopping while embroidering" (page 167). Press . c 4 If the needle count is not displayed, press (Settings key), and then use to display the following screen. Press to return to the previous screen. Press (Back one stitch) to move the d needle back about 10 stitches. (Forward one stitch) increases the stitch number. Restart the embroidery. e Press c (Embroidery key). X The confirmation message is displayed. Editing and Saving Patterns 167