Brother International Innov-ís 950D Users Manual - English - Page 67
Automatically cutting, the thread
View all Brother International Innov-ís 950D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Memo z Press (Start/stop button) when you want to stop the sewing machine in the middle of Press the stitch selection. b • For details on selecting a stitch, refer to "Selecting stitching" (page 51). sewing without reverse stitching or reinforcement stitching (for example, when you want to change the sewing direction). Press c on the screen. The sewing machine stops without reverse stitching or reinforcement stitching. Press (Reverse/reinforcement stitch button) at the end of the stitching. 2 1 X You get , and the sewing machine is set for programmed thread-cutting and automatic reverse/reinforcement stitching. 2a 4 3b a Stop the machine and change the sewing direction. b Start the machine again. Automatically cutting the thread The sewing machine can be set to automatically cut the threads at the end of the stitching. This is called "programmed thread-cutting". If programmed thread-cutting is set, automatic reverse/reinforcement stitching is also set. Turn on the machine. a Memo z To turn programmed thread cutting off, press . Position the fabric under the presser foot, and d then press (Start/stop button) once. X The LCD comes on. a a Start/stop button X Stitching starts after reverse stitching or reinforcement stitching. Useful Functions 65