Brother International Innov-ís 950D Users Manual - English - Page 187
The reverse/reinforcement stitch button, needle position button or
View all Brother International Innov-ís 950D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
No Error Message Probable Cause 19 You changed the stitch pattern settings, and then tried to save them by pressing the manual memory key. You tried to select an embroidery pattern or change the layout when 20 the needle was down. The machine is turned on while the needle is lowered and the embroidery unit is attached. 21 You tried to initialize the embroidery unit with the embroidery foot lowered. A pattern was being retrieved from a USB flash drive (USB flash memory) containing more than 200 embroidery patterns (including 22 folders). In addition, this message will appear if embroidery patterns containing many colors have been saved on the USB media, even if it contains data for no more than 200 patterns (including folders). The start/stop button was pressed after selecting a pattern which is 23 saved in the machine's memory or entered from the USB port without pressing (Retrieve key). 5 The reverse/reinforcement stitch button, needle position button or 24 thread cutter button was pressed while the bobbin winder shaft is moved to the right. 25 A pattern is being saved. 26 The start/stop button or reverse/reinforcement stitch button was pressed when no pattern is selected. 27 Bobbin thread has run out. Little bobbin thread remains. Troubleshooting 185