Brother International MFC 5860CN Users Manual - English - Page 122
Stop/Exit, Error Message, Cause, Action, Data Remaining, Disconnected, Document Jam, DR Mode in Use - no cartridge
UPC - 012502615910
View all Brother International MFC 5860CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Error Message Cause Action Data Remaining Print data is left in the machine's memory. Re-start printing from your computer. Print data is left in the machine's memory. The USB cable was unplugged while the computer was sending the data to the machine. Press Stop/Exit. The machine will cancel the job and clear it from the memory. Try to print again. Disconnected The other person or other person's Try to send or receive again. fax machine stopped the call. Document Jam The document was not inserted or fed properly, or the document scanned from the ADF was too long. See Using the ADF on page 10. See Document jam on page 109. DR Mode in Use The machine is set to Distinctive Ring mode. You cannot change the Receive Mode from Manual to another mode. Set Distinctive Ring to off. (See Turning off Distinctive Ring on page 43.) High Temperature The print head is too warm. Allow the machine to cool down. Init. Unable XX The machine has a mechanical problem. -OR- A foreign objects such as a clip or ripped paper is in the machine. Open the scanner cover and remove any foreign objects inside the machine. If the error message continues, see Transferring your faxes or Fax Journal report on page 108 before disconnecting the machine so you will not lose any important messages. Then, disconnect the machine from the power for several minutes and then reconnect it. Ink Empty One or more of the ink cartridges is empty. The machine will stop all print operations. While memory is available, black and white faxes will be stored in the memory. If a sending machine has a color fax, the machine's 'handshake' will ask that the fax be sent as black and white. If the sending machine has the ability to convert it, the color fax will be stored in the memory as a black and white fax. Replace the ink cartridges. (See Replacing the ink cartridges on page 113.) Low Temperature The print head is too cold. Allow the machine to warm up. Media Error The media card is either corrupted, improperly formatted, or there is a problem with the media card. Put the card firmly into the slot again to make sure it is in the correct position. If the error remains, check the media drive by putting in another media card that you know is working. 106