Brother International MFC-9340CDW Network Users Manual - English - Page 45
Ethernet (wired network only), Wired Status (For DCP-9020CDN, DCP-9020CDW, MFC-9140CDN
View all Brother International MFC-9340CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Control panel setup Ethernet (wired network only) 4 Ethernet link mode auto allows the print server to operate in 100BASE-TX full or half duplex or in 10BASE-T full or half duplex mode by auto negotiation. NOTE If you set this value incorrectly, you may not be able to communicate with your print server. Wired Status (For DCP-9020CDN, DCP-9020CDW, MFC-9140CDN, MFC-9330CDW and MFC-9340CDW) 4 4 This field displays the current wired network status. Setup Wizard (wireless network only) 4 The Setup Wizard guides you through the wireless network configuration. (For more information: see Quick Setup Guide or Manual configuration from the control panel on page 19.) WPS (Wi-Fi Protected Setup)/AOSS™ (wireless network only) 4 If your WLAN access point/router supports either WPS (PBC 1) or AOSS™ (Automatic Wireless mode), you can configure the machine easily. (For more information: see Quick Setup Guide or One push configuration using WPS (Wi-Fi Protected Setup) or AOSS™ on page 27.) 1 Push Button Configuration WPS (Wi-Fi Protected Setup) w/PIN Code (wireless network only) 4 If your WLAN access point/router supports WPS (PIN Method), you can configure the machine easily. (For more information, see Configuration using the PIN Method of WPS (Wi-Fi Protected Setup) on page 29.) WLAN Status (For DCP-9020CDW, MFC-9130CW, MFC-9330CDW and MFC-9340CDW) 4 Status 4 This field displays the current wireless network status. Signal 4 This field displays the current wireless network signal strength. 39