Brother International MFC-9340CDW Network Users Manual - English - Page 71
Test Print Log to Network, Kerberos Server Address
View all Brother International MFC-9340CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Web Based Management Auth. Method Choose the authentication method required for access to the CIFS server Auto, Kerberos 1, or NTLMv2 2. 1 Kerberos is an authentication protocol which allows devices or individuals to securely prove their identity to network servers using a single sign-on. 2 NTLMv2 is the authentication method used by Windows to log into servers. • Auto: If you choose Auto, the machine will initially search for a Kerberos server. If the Kerberos server is not detected, NTLMv2 will be used for the authentication method. • Kerberos: Choose Kerberos to use Kerberos Authentication only. • NTLMv2: Choose NTLMv2 to use NTLMv2 Authentication only. For Kerberos and NTLMv2 Authentication, you must also configure the Date&Time settings or 5 the SNTP protocol (network time server). For configuring the Date&Time and the SNTP settings, see Synchronize with SNTP server on page 62. You can also configure the Date&Time settings from the machine's control panel. See Quick Setup Guide. Username Enter the Username for the authentication (up to 96 characters). NOTE If the username is part of a domain, please input the username in one of the following styles: user@domain or domain\user. Password Enter the password for the authentication (up to 32 characters). Kerberos Server Address (if needed) Enter the KDC Host Address (for example: mypc.example.com) (up to 64 characters) or the IP address (for example: 192.168.56.189). Error Detection Setting (See Error Detection Setting on page 66.) d In the Connection Status, you can confirm the last log status. For more information, see Understanding Error Messages on page 67. e Click Submit to display the Test Print Log to Network page. To test your settings, click Yes and go to step f. To skip the test, click No. Your settings will be submitted automatically. f The machine will test your settings. g If your settings are accepted, Test OK appears on the page. If Test Error appears, check all settings, and then click Submit to display the Test page again. 65