Brother International NX-250 Users Manual - English - Page 10
Names of Machine Parts and Their Functions
View all Brother International NX-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Names of Machine Parts and Their Functions The names of the various parts of the sewing machine and their functions are described below. Before using the sewing machine, carefully read these descriptions to learn the names of the machine parts. Front view 1 C B A 0 2 3 4 5 6 7 9 8 1 Thread guide plate Pass the thread under the thread guide plate. 2 Thread guide cover Pass the thread behind the thread guide cover when threading the upper thread. 3 Spool pin Place a spool of thread on the spool pin. 4 Bobbin winding thread guide and pretension disk Pass the thread under this thread guide and around the pretension disk when winding the bobbin thread. 5 Top cover Open the top cover to place the spool of thread on the spool pin. 6 Bobbin winder Use the bobbin winder when winding the bobbin. 7 Operation panel Use for stitch selection and various stitch functions (pages 12). 8 Operation buttons and sewing speed controller Use these buttons and the slide to operate the sewing machine (page 11). 9 Flat bed attachment with accessory compartment Store presser feet and bobbins in the accessory compartment of the flat bed attachment. When sewing cylindrical pieces, remove the flat bed attachment. 0 Thread cutter Pass the threads through the thread cutter to cut them. A Needle threader lever Use the needle threader to thread the needle. B Thread take-up lever check window Look through the window to check the position of the take-up lever. C Thread tension dial Use the thread tension dial to adjust the tension of the upper thread. Names of Machine Parts and Their Functions 9