Brother International NX-250 Users Manual - English - Page 36

Removing the presser foot holder Using the optional walking foot Remove the presser foot holder when cleaning the With the walking foot, both pieces of fabric are fed sewing machine or when installing a presser foot that evenly by the feed dogs and the teeth on the presser 1 does not use the presser foot holder, such as the foot. This is useful when sewing fabrics that are hard quilting foot. Use the screwdriver to remove the to feed such as vinyl and leather and when sewing presser foot holder. fabrics that easily slip such as velvets or when ■ Removing the presser foot holder quilting. Use the screwdriver to attach the walking foot. Remove the presser foot. 1 • For details, refer to "Replacing the presser foot" (page 33). Use the screwdriver to loosen the presser foot 2 holder screw. ■ Attaching the walking foot b ac 1 Screwdriver 2 Presser foot holder 3 Presser foot holder screw ■ Attaching the presser foot holder Align the presser foot holder with the lower1 left side of the presser bar. Remove the presser foot holder. 1 • For details, refer to "Removing the presser foot holder" (at the left). Hook the connecting fork of the walking foot 2 onto the needle clamp screw. a b Hold the presser foot holder in place with 2 your right hand, and then tighten the screw using the screwdriver in your left hand. 1 Connecting fork 2 Needle clamp screw Lower the presser foot lever, insert the presser 3 foot holder screw, and then tighten the screw with the screwdriver. a 1 1 Screwdriver Note ● If the presser foot holder is not correctly installed, the thread tension will be incorrect. 1 Presser foot holder screw Replacing the Presser Foot 35