Brother International NX-250 Users Manual - English - Page 67

Buttonhole sewing

Get Brother International NX-250 PDF manuals and user guides View all Brother International NX-250 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

UTILITY STITCHES Buttonhole sewing The maximum buttonhole length is about 28 mm (1-1/8 inches) (diameter + thickness of the button). Buttonholes are sewn from the front of the presser foot to the back, as shown below. 1 1 1 1 Reinforcement stitching The names of parts of buttonhole foot "A", which is used for sewing buttonholes, are indicated below. 1 2 5 3 4 A 1 Button guide plate 2 Presser foot scale 3 Pin 4 Marks on buttonhole foot 5 5 mm (3/16 inch) Use chalk to mark on the fabric the position 1 and length of the buttonhole. 1 1 Marks on fabric Pull out the button guide plate of buttonhole 2 foot "A", and then insert the button that will be put through the buttonhole. 66

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
66
UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Buttonhole sewing
The maximum buttonhole length is about 28 mm (1-1/8 inches) (diameter + thickness of the button).
Buttonholes are sewn from the front of the presser foot to the back, as shown below.
The names of parts of buttonhole foot “A”, which is
used for sewing buttonholes, are indicated below.
1
Button guide plate
2
Presser foot scale
3
Pin
4
Marks on buttonhole foot
5
5 mm (3/16 inch)
1
Use chalk to mark on the fabric the position
and length of the buttonhole.
1
Marks on fabric
2
Pull out the button guide plate of buttonhole
foot “A”, and then insert the button that will
be put through the buttonhole.
1
1
1
1
Reinforcement stitching
A
1
2
5
3
4
1