Brother International NX-250 Users Manual - English - Page 21
Installing the bobbin
View all Brother International NX-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
GETTING READY Installing the bobbin Install the bobbin wound with thread. CAUTION ● Use a bobbin that has been correctly wound with thread, otherwise the needle may break or the thread tension will be incorrect. ● The bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the included bobbin or bobbins of the same type (part code: SA156, SFB (XA5539151)). Actual size 11.5 mm (7/16 inch) This model Other model Memo ● The order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. Be sure to thread the machine as indicated. Slide the bobbin cover latch to the right. 1 1 2 Remove the bobbin cover. 2 Hold the bobbin with your right hand and 3 hold the end of the thread with your left. • Be careful not to drop the bobbin. Insert the bobbin into the bobbin case so that 4 the thread unrolls to the left. • Be sure to insert the bobbin correctly. • CAUTION ● Be sure to install the bobbin so that the thread unwinds in the correct direction, otherwise the thread may break or the thread tension will be incorrect. Memo ● The order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. Be sure to thread the machine as indicated. The marks around the bobbin case differ depending on the model. 1 Bobbin cover 2 Latch X The bobbin cover opens. 20