Brother International NX-250 Users Manual - English - Page 34
Replacing the Presser Foot
View all Brother International NX-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Replacing the Presser Foot The presser foot presses down on the fabric. 1 Presser foot precautions Be sure to observe the following precautions concerning the presser feet. CAUTION ● Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the needle may hit the presser foot, causing the needle to bend or break. ● Only use presser feet designed specifically for this sewing machine. Use of any other presser foot may result in injuries or damage to the machine. Replacing the presser foot Replace the presser foot as described below. Press ("Needle Position" button) once 1 or twice to raise the needle. 1 CAUTION ● Before replacing the presser foot, be sure to turn off the sewing machine, otherwise injuries may occur if ("Start/Stop" button) is accidentally pressed and the machine starts sewing. Raise the presser foot lever. 3 1 "Needle Position" button X The needle is raised. Turn off the sewing machine. 2 a 1 Presser foot lever X The presser foot is raised. Press the black button at the back of the 4 presser foot holder. a b 1 Black button 2 Presser foot holder X The presser foot holder releases the presser foot. Replacing the Presser Foot 33