Brother International NX-250 Users Manual - English - Page 57
Selecting Stitching
View all Brother International NX-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
UTILITY STITCHES Selecting Stitching You can select any of the various types of stitching available. Selecting stitching Turn on the sewing machine. 4 Using the operation panel keys, select the desired stitch. Immediately after turning on the machine, the straight stitch (left needle position) is selected. The machine can also be set to select the straight stitch (center needle position). For details, refer to "Changing the initial needle stop position" (page 50). The stitch pattern plate shows the stitches and the stitch numbers. A letter (A, G, J, N or R) indicating the presser foot that should be used appears below the stitch number. 1 X When the machine is first turned on, "00" will be displayed. Press (Stitch selection key). 5 The number of the selected stitch is displayed. Each press of increases the number by one. After "9" ( "7" for the number on the left) is reached, the number returns to "0". Each press of decreases the number by one. After "0" is reached, the number returns to "9" ("7" for the number on the left). Pressing on the right changes the second digit (ones), and pressing left changes the first digit (tens). on the 1 Stitch pattern plate Determine the stitch that you wish to use. 1 • Refer to the stitch pattern plate. Determine which presser foot should be used 2 with the selected stitch. The presser feet are stored in the accessory compartment. • For details on the stitches that can be sewn with the twin needle, refer to "Stitch Settings" (page 94). Attach the presser foot. 3 • For details, refer to "Replacing the presser foot" (page 33). X The stitch is selected. If necessary, specify the setting for automatic 6 reverse/reinforcement stitching and adjust the stitch length, etc. • For details on sewing with each of the utility stitches, begin on page 58. 56