Brother International NX-250 Users Manual - English - Page 81
Patchwork crazy quilt, stitching, Piecing
View all Brother International NX-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
UTILITY STITCHES Patchwork (crazy quilt) stitching Fold the edge of the top piece of fabric and 1 place it over the lower piece. Sew the two pieces of fabric together so the 2 pattern spans over both pieces. Sew with the side of the presser foot aligned 4 with the edge of the fabric. ■ For a seam allowance on the right side Align the right side of the presser foot with the edge of the fabric, and sew using stitch 14 . 1 1 6.5 mm (1/4 inch) ■ For a seam allowance on the left side Align the left side of the presser foot with the edge of the fabric, and sew using stitch 15 . 1 Piecing Sewing together two pieces of fabric is called "piecing". The fabric pieces should be cut with a 6.5 mm (1/4 inch) seam allowance. Sew a piecing straight stitch 6.5 mm (1/4 inch) from either the right side or the left side of the presser foot. Baste or pin along the seam allowance of the 1 fabric that you wish to piece together. Attach zigzag foot "J". 2 J • For details, refer to "Replacing the presser foot" (page 33). Select stitch 14 or 15 . 3 • For details, refer to "Selecting stitching" (page 56). 1 6.5 mm (1/4 inch) Memo ● To change the width of the seam allowance (the needle position), adjust the stitch width. For details, refer to "Adjusting the stitch width" (page 47). 80