Brother International NX-250 Users Manual - English - Page 28
Using the twin needle
View all Brother International NX-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Using the twin needle Insert the extra spool pin onto the bobbin 4 winder shaft. With the twin needle, you can sew two parallel lines of the same stitch with two different threads. Both upper threads should have the same thickness and quality. Be sure to use the twin needle, the extra Insert the extra spool pin so that it is perpendicular to the bobbin winder shaft. 1 1 spool pin and the spool cap. For details on the stitches that can be sewn with the twin needle, refer to "Stitch Settings" (page 94). 1 Bobbin winder shaft Swing down the spool pin so that it is 5 horizontal. CAUTION ● Only use the twin needle (part code: X59296-151). Use of any other needle may bend the needle or damage the machine. ● Never use bent needles. Bent needles can easily break, possibly resulting in injuries. Install the twin needle. 1 • For details on installing a needle, refer to "Replacing the needle" (page 32). Thread the upper thread for the left needle 2 eye. • For details, refer to steps 1 through a of "Threading the upper thread" (page 22). Manually thread the left needle with the 3 upper thread. Pass the thread through the eye of the needle from the front. Place the upper thread spool for the needle on 6 the right side onto the extra spool pin, and then secure it with the spool cap. The thread should unroll from the top front of the spool. 1 2 1 Spool cap 2 Spool Thread the upper thread for the right side in 7 the same way that the upper thread for the left side was threaded. 1 • The needle threader cannot be used with the twin needle. If the needle threader is used with the twin needle, the sewing machine may be damaged. 1 Thread guide cover • For details, refer to step 8 through 0 of "Threading the upper thread" (page 22). Upper Threading 27