Brother International NX-250 Users Manual - English - Page 39
Do not move the sewing machine while, the wide table is attached, otherwise, damage or injuries may
View all Brother International NX-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
GETTING READY Turn the screw at the bottom of each leg to 4 adjust their height so the wide table will be level with the sewing machine bed. CAUTION ● Do not move the sewing machine while the wide table is attached, otherwise damage or injuries may occur. When you are finished using the wide table, 5 remove it. While slightly lifting up the wide table, pull it off to the left. Install the flat bed attachment back in its 6 original position. Memo ● With the legs folded up, the wide table can be stored attached to the hard case. 38
38
GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
4
Turn the screw at the bottom of each leg to
adjust their height so the wide table will be
level with the sewing machine bed.
5
When you are finished using the wide table,
remove it.
While slightly lifting up the wide table, pull it
off to the left.
6
Install the flat bed attachment back in its
original position.
Memo
●
With the legs folded up, the wide table can
be stored attached to the hard case.
●
Do not move the sewing machine while
the wide table is attached, otherwise
damage or injuries may occur.
CAUTION