Brother International NX-250 Users Manual - English - Page 44
injuries may occur.
View all Brother International NX-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Turn on the sewing machine. 3 When you are finished sewing, raise the 7 needle, and then cut the threads. • For details, refer to "Cutting the thread" (page 45). Slide the sewing speed controller to the left or 4 right to select the desired sewing speed. Slide the sewing speed controller to the left to sew at a slower speed, or slide the speed controller to the right to sew at a faster speed. 1 Memo ● If (Needle stop position key) is lit, the sewing machine will stop with the needle raised. If the key is not lit, the sewing machine will stop with the needle lowered. 2 The needle position setting selected with the needle stop position key does not change if the sewing machine is turned off. ● When the foot controller is plugged in, ("Start/Stop" button) cannot be used to start or stop sewing. 1 Sewing speed controller • The speed set using the sewing speed controller will be the foot controller's maximum sewing speed. Once you are ready to start sewing, slowly 5 press down on the foot controller. Pressing down on the foot controller increases the sewing speed; releasing the pressure on the foot controller decreases the sewing speed. CAUTION ● Do not allow thread or dust to accumulate in the foot controller, otherwise a fire or an electric shock may occur. ● Do not place objects on the foot controller, otherwise damage to the machine or injuries may occur. ● If the machine is not to be used for a long period of time, unplug the foot controller, otherwise a fire or an electric shock may occur. Slower Faster • Slowly press down on the foot controller. Pressing it down hard starts sewing too quickly. X The machine starts sewing. When the end of the stitching is reached, 6 completely release the foot controller. X The machine stops sewing with the needle lowered (in the fabric). Sewing 43