Brother International NX-250 Users Manual - English - Page 22
When installing the bobbin, be sure to, hold it down with your finger. If the, bobbin is
View all Brother International NX-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Lightly hold down the bobbin with your right 5 hand, and then guide the thread as shown with your left hand. Reattach the bobbin cover. 7 Insert the tab in the lower-left corner of the bobbin cover, and then lightly press down on the right side. 2 1 CAUTION ● When installing the bobbin, be sure to hold it down with your finger. If the bobbin is not correctly installed, the thread tension will be incorrect. Pass the thread through the slot as shown, and 6 then pull the thread out toward the front. 1 1 Cutter X The cutter cuts the thread. Note ● Make sure that the thread is correctly inserted through the tension-adjusting spring of the bobbin case. If it is not inserted correctly, reinsert the thread. 1 X The lower threading is finished. Next, thread the upper thread. Continue with the procedure in "Upper Threading" (page 22). Memo ● You can begin sewing without pulling up the bobbin thread. If you wish to pull up the bobbin thread before starting to sew, pull up the thread according to the procedure in "Pulling up the bobbin thread" (page 29). 1 1 Tension-adjusting spring Winding/Installing the Bobbin 21