Brother International NX-250 Users Manual - English - Page 38
Sewing Cylindrical or Large Pieces
View all Brother International NX-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Sewing Cylindrical or Large Pieces When sewing cylindrical or large pieces of fabric, remove the flat bed attachment. Stitching cylindrical pieces 1 Sewing large pieces of fabric Removing the flat bed attachment makes it easier to sew cylindrical pieces such as cuffs and pant legs. The optional wide table makes sewing large pieces of fabric easier. Pull the flat bed attachment off to the left. 1 Open up the legs at the bottom of the wide 1 table. Pull out the four legs until they snap into place. X With the flat bed attachment removed, freearm sewing is possible. Slide the part that you wish to sew onto the 2 arm, and then sew from the top. Pull the flat bed attachment off to the left. 2 When you are finished with free-arm sewing, 3 install the flat bed attachment back in its original position. X With the flat bed attachment removed, freearm sewing is possible. Install the wide table. 3 Keeping the wide table level, fully slide it into place. The lower right corner section of the wide table extends over the front section of the sewing machine bed. b a 1 Lower right corner 2 Sewing machine bed Note ● The optional wide table is available through your Brother dealer. Sewing Cylindrical or Large Pieces 37