Brother International NX-250 Users Manual - English - Page 92
Drawnwork Example 2
View all Brother International NX-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Select stitch 31 . 3 • For details, refer to "Selecting stitching" (page 56). Attach monogramming foot "N". 2 With the right side of the fabric facing up, sew 4 along the right edge of the frayed section. • For details, refer to "Replacing the presser foot" (page 33). N Select stitch 34 . 3 • For details, refer to "Selecting stitching" (page 56). Sew along the center of the unfrayed section. Turn the fabric around to sew the opposite side. 5 4 3 Sew along the other edge of the frayed section 6 so that it looks like the previous stitching. N N ■ Drawnwork (Example 2) Pull out several threads from two sections of 1 the fabric, separated by an unfrayed section of about 4 mm (3/16 inch). 1 1 4 mm (3/16 inch) Decorative Stitching 91
Decorative Stitching
91
3
3
Select stitch
31
.
• For details, refer to “Selecting stitching”
(page 56).
4
With the right side of the fabric facing up, sew
along the right edge of the frayed section.
5
Turn the fabric around to sew the opposite side.
6
Sew along the other edge of the frayed section
so that it looks like the previous stitching.
■
Drawnwork (Example 2)
1
Pull out several threads from two sections of
the fabric, separated by an unfrayed section of
about 4 mm (3/16 inch).
1
4 mm (3/16 inch)
2
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser
foot” (page 33).
3
Select stitch
34
.
• For details, refer to “Selecting stitching”
(page 56).
4
Sew along the center of the unfrayed section.
N
N
1
N