Brother International NX-250 Users Manual - English - Page 76

When sewing, be sure that the needle, does not touch the zipper, otherwise the, needle may bend or

Get Brother International NX-250 PDF manuals and user guides View all Brother International NX-250 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

Close the zipper, turn over the fabric, and then 0 baste the other side of the zipper to the fabric. 1 When you are about 5 cm (2 inches) from the c end of the zipper, stop the sewing machine with the needle lowered (in the fabric), raise the presser foot lever, and then open the zipper and continue sewing. Remove the basting stitching. d 1 Basting stitching Attach the presser foot holder to the other pin a of zipper foot "I". If the presser foot holder was attached to the right pin in step 6, change it to the left pin. 3 1 I 2 1 Pin on the left side 2 Needle drop point Topstitch around the zipper. b Sew reverse stitches at the end of the zipper opening and align the zipper teeth with the side of the presser foot. 3 4 2 1 5 1 Right side of fabric 2 End of zipper opening 3 Reverse stitches 4 Beginning of stitching 5 Basting stitching CAUTION ● When sewing, be sure that the needle does not touch the zipper, otherwise the needle may bend or break. Zipper Insertion 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
Zipper Insertion
75
3
0
Close the zipper, turn over the fabric, and then
baste the other side of the zipper to the fabric.
1
Basting stitching
a
Attach the presser foot holder to the other pin
of zipper foot ā€œIā€.
If the presser foot holder was attached to the
right pin in step
6
, change it to the left pin.
1
Pin on the left side
2
Needle drop point
b
Topstitch around the zipper.
Sew reverse stitches at the end of the zipper
opening and align the zipper teeth with the
side of the presser foot.
1
Right side of fabric
2
End of zipper opening
3
Reverse stitches
4
Beginning of stitching
5
Basting stitching
c
When you are about 5 cm (2 inches) from the
end of the zipper, stop the sewing machine
with the needle lowered (in the fabric), raise
the presser foot lever, and then open the
zipper and continue sewing.
d
Remove the basting stitching.
ā—
When sewing, be sure that the needle
does not touch the zipper, otherwise the
needle may bend or break.
1
I
2
1
1
2
3
4
5
CAUTION