Canon MultiPASS F50 MFP F50 FAX Guide - Page 43
Setting the Options for FAX/TEL AUTO SW, What Happens When FAX/TEL AUTO SW is Selected
View all Canon MultiPASS F50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Setting the Options for FAX/TEL AUTO SW If you set FAX/TEL AUTO SW, you can control precisely how the machine handles incoming calls by adjusting the following settings: • Adjust the time the machine takes to check whether a call is from a fax machine or a telephone (RING START TIME setting). • Adjust the length of time the machine rings when the call is a voice call (F/T RING TIME setting). • Set whether the machine switches to receive mode after the ring time set in F/T RING TIME has elapsed (DEFAULT ACTION setting). • You can also set these options from the MultiPASS Suite. (→ MultiPASS Suite User's Guide) NOTE I What Happens When FAX/TEL AUTO SW is Selected Type of call Telephone Fax Sending document manually Fax Sending document automatically Telephone charges begin for the caller. The machine answers without ringing. RING START TIME (Factory default setting = 8 sec.) The machine listens for the fax tone. (For 8 sec.) The fax tone is detected. F/T RING TIME (Factory default setting=15 sec.) The fax tone is not detected. The machine starts ringing. If you don't pick up the handset (within 15 sec.). The document is received automatically. The fax tone is detected and the machine switches to receive mode. Pick up the handset to talk. DEFAULT ACTION Choose between: RECEIVE (Factory default setting) and DISCONNECT. DISCONNECT The machine disconnects the call. RECEIVE (Factory default setting) Not all fax machines are capable of sending a fax tone. For those cases if you set the DEFAULT ACTION to RECEIVE, the machine switches to receive mode automatically and starts receiving the document. If no document comes in, it disconnects the call after approximately 40 seconds. 5-2