Canon MultiPASS F50 MFP F50 FAX Guide - Page 67

Name 6. COLOR DIRECT TX 4. RX SETTINGS 1. ECM RX 2. FAX/TEL AUTO SW 1. RING START TIME 2. F/T RING TIME Description Enables/disables sending of color documents from the ADF to fax machines that do not have color faxes capability. (→ p. 4-1) OFF: Color documents cannot be sent to fax machines that do not support color faxes. ON: Color documents can be sent to fax machines that do not support color faxes. (The document is converted to black & white.) Enables/disables Error Correction Mode (ECM) during reception. When the machine is set to FAX/TEL AUTO SW, you can set its details. (→ p. 5-2) Selects the time the machine takes to check whether a call is from a fax machine or a telephone. Selects the length of time the machine rings when the call is a voice call. Settings OFF ON ON OFF 8 SEC (0 to 30) 15 SEC (10 to 45) 3. DEFAULT ACTION 3. DRPD:SELECT FAX 4. INCOMING RING RING COUNT Sets whether the machine switches to receive mode after the ring time set in F/T RING TIME has elapsed. When the machine is set to DRPD, selects a ring pattern when the machine receives faxes. (→ p. 5-4) When the machine is set to FAX ONLY MODE, FAX/TEL AUTO SW or DRPD, enables/ disables ringing when the machine receives a call.* Selects the number of incoming rings before the machine begins receiving. RECEIVE DISCONNECT DOUBLE RING SHORT-SHORTLONG SHORT-LONGSHORT OTHER RING TYPE NORMAL RING OFF ON 2 TIMES (1 to 99) * Even if you have set INCOMING RING to ON, ringing will only occur if you have connected a telephone to your machine. 9-6