Canon MultiPASS F50 MFP F50 FAX Guide - Page 50

7 Press Start to begin scanning for sending. • To cancel the transmission once dialing has started, press Stop/Reset then T. (→ p. 4-9) • To take advantage of the speed dialing NOTE features of your machine, register frequently used overseas numbers for onetouch or coded speed dialing. (→ pp. 3-2, 3-4) Switching Temporarily to Tone Dialing Many information services for banks, airline reservations, hotel reservations, etc., require tone dialing for their services. If your machine is connected to a rotary pulse line, follow this procedure to set the machine temporarily for tone dialing: 1 Press Fax to set Fax Mode. 12/03/2001 MON 15:30 Ex: F a x T e l STANDARD 2 Press Hook. • You can also lift the handset instead of pressing Hook. 3 Use the numeric buttons to dial the telephone number of the information service. TEL= 7654321 Ex: • The machine connects using the pulses required by your telephone line. 4 When the recorded message of the information service answers, press T (Tone) to switch to tone dialing. • When T (Tone) is pressed, T is displayed in the LCD. • If you pressed Hook in step 2, you can pick up the handset if you need to talk to the other party. 5 Use the numeric buttons to enter the numbers requested by the information service. TEL= 7654321TA34 Ex: • Numbers entered after pressing T (Tone) will be dialed using tone dialing. 6 When you have finished, press Hook to disconnect the call. • If you used the handset, hang up to disconnect the call. • Tone dialing is canceled when you disconnect the call. TEL= Ex: 7654321T 6-2