Canon PowerShot ELPH 320 HS Blue User Guide - Page 92

Special Modes for Other Purposes • On-screen image brightness in step 3, when you pressed the shutter button halfway, may not match the brightness of your shots. • With shutter speeds of 1.3 seconds or slower, there will be a delay before you can shoot again, as the camera processes images to reduce noise. • Set [IS Mode] to [Off] when using a tripod or other means to hold the camera still (p. 119). • If the flash fires, your shot may be overexposed. In this case, set the flash to ! and shoot again. • You can also configure this setting in the H menu, accessed by touching H (p. 41). Still Images High-Speed Continuous Shooting (High-speed Burst) You can shoot a series of shots in rapid succession by holding the shutter button all the way down. For details on the continuous shooting speed, see "Specifications" in the Getting Started guide. Choose . z Follow steps 1 - 2 on p. 76 and choose . Shoot. X Hold the shutter button all the way down to shoot continuously. ELPH 530 HS IXUS 510 HS • The resolution is ELPH 320 HS IXUS 240 HS • The resolution is (1824 x 1368) and cannot be changed. (2304 x 1728) and cannot be changed. • Focus, image brightness, and color are determined by the first shot. • Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position. • As more shots are taken, shooting may slow down. 92