Canon SX50 Realis_E.pdf - Page 21
Determining the Installation Place
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
INSTALLING THE PROJECTOR Determining the Installation Place Placing in Front of the Screen Place the projector in front of the screen in such a manner that it is as perpendicular to the screen as possible. Screen Optical axis A slight error in the projection angle can be corrected using the KEYSTONE button. (P31) Placing on a Level Place Place the projector on a level place. • Make sure that the installation place is free from any obstacle that may block the exhaust vent (fan) on the right side of the projector and the air intake vent (air filter) on the bottom of the projector. • The screen must not be exposed to direct sunlight or light from lighting equipment. In a bright room, it is recommended to limit ambient lighting in order to improve the image quality. Note This projector can be hung from the ceiling (Ceiling mounted) with it turned up side down. When a translucent screen is used, the projector can project an image from behind the screen (Rear). When the projector is hung from the ceiling or projector projects an image from behind the screen, the image must be inverted vertically or horizontally. (P61) When hanging the projector from the ceiling, optional brackets (part No. RS-CL01) are required. 21