Canon SX50 Realis_E.pdf - Page 32
amount of optical zooming, input signal type, and adjustment direction vertical
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
PROJECTING AN IMAGE FROM THE COMPUTER • The result of keystone adjustment is memorized. If the projector installation position is the same as before, keystone adjustment is not required. • When Keystone Adjustment is selected, signals are processed digitally. The image may look different from the original one. • The aspect ratio of the image may change when keystone is adjusted. • Keystone can be adjusted vertically and horizontally within the range of +/-20 degrees. The amount of adjustment varies depending on the combination of the amount of optical zooming, input signal type, and adjustment direction (vertical or horizontal). • If the keystone distortion is too large to adjust, move the projector installation position. • To cancel the keystone adjustment, press the [KEYSTONE] button again to display [Keystone Reset]. Then, press the [OK] button. 32