Canon SX50 Realis_E.pdf - Page 31
Adjusting Keystone Distortion
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Adjusting Keystone Distortion If a projected picture has keystone distortion, correct it by using the keystone adjustment feature. 1 Select Keystone Adjustment. "Keystone adjustment" appears on the screen. Remote control Top control 2 Correct keystone distortion. To reduce the length To reduce the length Keystone distortion must be corrected of the upper edge, of the lower edge, while "Keystone adjustment" is displayed press [^]. press [v]. on the screen. ("Keystone adjustment" disappears 10 seconds later.) To reduce the length To reduce the length of the left edge, press of the right edge, []. 3 Press the [OK] button. PROJECTING AN IMAGE FROM THE COMPUTER 31
31
PROJECTING AN IMAGE FROM THE COMPUTER
Adjusting Keystone Distortion
If a projected picture has keystone distortion, correct it by using the keystone adjustment
feature.
1
2
Select Keystone Adjustment.
“Keystone adjustment” appears on the
screen.
Correct keystone distortion.
Keystone distortion must be corrected
while “Keystone adjustment” is displayed
on the screen. (“Keystone adjustment”
disappears 10 seconds later.)
Press the [OK] button.
To reduce the length
of the upper edge,
press [^].
To reduce the length
of the left edge, press
[<].
To reduce the length
of the lower edge,
press [v].
To reduce the length
of
the
right
edge,
press [>].
3
Remote control
Top control