Canon SX50 Realis_E.pdf - Page 48
Normal VIDEO, S-VIDEO and COM, PONENT input only, Wide Screen VIDEO, S-VIDEO and, COMPONENT input
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Adjusting the Image The image adjustment method is the same as that used when the projector is connected to a computer. Lets take a look at only the topics specific to AV equipment. For other image adjustment methods, see P30. Selecting a Screen Mode You can select one of three screen modes depending on your AV equipment, specifications of playback software, etc. • A screen mode can be selected by selecting "Screen settings" from the menu. (58) J Normal (VIDEO, S-VIDEO and COM- 4:3 PONENT input only) Select this if you want to project an image at a 4:3 aspect ratio (W:H). J Wide Screen (VIDEO, S-VIDEO and 16:9 COMPONENT input only) Select this if you want to project an image at a 16:9 aspect ratio (W:H). For wide screen sizes, see the table on 85. J Auto (COMPONENT input only) To switch between [Normal] and [Wide Screen] automatically depending on the image from the AV equipment, select [Auto]. • The upper, lower, left, and/or right portions of a projected image may be missing depending on the selected display mode • When DIGITAL RGB or ANALOG RGB-1 is selected as the input signal type, the display mode is the same as that used when the projector is connected to the computer. (P33) 48 PROJECTING AN IMAGE FROM AV EQUIPMENT