Canon SX50 Realis_E.pdf - Page 72

Setting a, Password, Setting up the, Remote Control

Get Canon SX50 - REALiS SXGA+ LCOS Projector PDF manuals and user guides
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Setting a Password Setting up the Remote Control Set a password in the projector. Once the password is set, you will need to enter the password each time you turn on the projector. When you use two projectors at the same time, change the channel settings to prevent the two remote controls from interfering with each other. System settings Password settings System settings Remote control SETTING UP FUNCTIONS USING MENUS Off The password function is not used. On The password function is used. Ch1 Select the channel on the Ch2 projector you use, and then press the [OK] button. • Once a password is set in the projector, a password entry screen appears at power-on. Enter a 4digit password using [^], [v], [] buttons. If the password is valid, projection starts. If you enter a wrong password three times, the projector will be turned off. • To cancel the password, remove the power plug from the AC outlet after completion of projection, and then insert the power plug in the AC outlet with the [MENU] button pressed. between CH1 (the button flashes once) and CH2 (the button flashes twice). • When setting a channel, be sure to set the same channel for either control (remote control or top control). Set a different channel for the other pair. • When performing menu operation using the remote control, changing the channel by pressing the [OK] button will prevent you for using the remote control. 72

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
72
SETTING UP FUNCTIONS USING MENUS
Set a password in the projector. Once the
password is set, you will need to enter the
password each time you turn on the
projector.
The password function is not
used.
The password function is
used.
• Once a password is set in the
projector, a password entry screen
appears at power-on.
Enter a 4-
digit password using [^], [v], [<],
and [>] buttons. If the password is
valid, projection starts. If you enter
a wrong password three times, the
projector will be turned off.
• To cancel the password, remove
the power plug from the AC outlet
after completion of projection, and
then insert the power plug in the
AC outlet with the [MENU] button
pressed.
Setting a
Password
When you use two projectors at the same
time, change the channel settings to
prevent the two remote controls from
interfering with each other.
Select the channel on the
projector you use, and then
press the [OK] button.
Selecting a Channel for the Remote Control
While pressing the [OK] button on the remote
control, press the [LIGHT] button for 3
seconds.
Pressing the two buttons allows you to switch
between CH1 (the button flashes once) and
CH2 (the button flashes twice).
•
When setting a channel, be sure to
set the same channel for either
control (remote control or top
control). Set a different channel for
the other pair.
• When performing menu operation
using the remote control, changing
the channel by pressing the [OK]
button will prevent you for using
the remote control.
Setting up the
Remote Control
System settings
Password settings
System settings
Remote control
Off
On
Ch1
Ch2