Canon SX50 Realis_E.pdf - Page 59
Selecting a, Logo Display Position
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Capturing a Logo to Be Displayed Selecting a Logo Display Position A user's unique image (logo) can be displayed when the power is turned on, there is no input signal, or the image is blacked out temporarily. Select a logo display position. A logo can be displayed at the center or in a corner of a desired screen. Display settings User screen settings Logo capture Display settings User screen settings Logo position SETTING UP FUNCTIONS USING MENUS OK Cancel The image to be captured is displayed on the screen. Place the red frame on the capture range and press [OK]. The image in the red frame will be captured. Cancel registration of the image. • The image on only one screen can be captured. • To display the captured image, select "Logo capture" on the "Projector on", "No signal", or "NO SHOW" screen. • No image can be captured depending on the resolution and scan system you selected. Upper L Upper R Center Lower L Lower R Select a logo display position. 59