Canon SX50 Realis_E.pdf - Page 56

Selecting an Input Signal Type (1) Selecting an Input Signal Type (2) When two or more types of input signals are found during execution of the auto PC adjustment function, select a correct input signal type. When images from AV equipment is not projected correctly (irregular color or no image), you can select an input signal type manually. Display settings Input signal select Display settings Input signal select SETTING UP FUNCTIONS USING MENUS [1280 x 1024] [1400 x 1050] ••• Select an input signal type suitable for the computer from the displayed signal types. • Select an input signal type when the auto PC adjustment function cannot project images correctly and two or more signal types are found. • For the signal types supported by this projector, see P84. Auto NTSC PAL SECAM NTSC4.43 PAL-M PAL-N The input signal is automatically set. If images are not projected correctly in the Auto mode, select one of input signal types shown on the left. Confirm the input signal type according to the User's Manual that came with the AV equipment connected. 56