Canon SX50 Realis_E.pdf - Page 43
Connecting to Audio Terminals
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Connecting to Audio Terminals Connect audio cables as required. Before connecting cables, turn off both the projector and computer. To AUDIO OUT Connect with an audio cable (with stereo mini jacks). • Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. • The built-in speaker is monaural. • The speaker issues the sound from the equipment to which an audio cable is connected. 43 PROJECTING AN IMAGE FROM AV EQUIPMENT
43
PROJECTING AN IMAGE FROM AV EQUIPMENT
Connecting to Audio Terminals
Connect audio cables as required.
Before connecting cables, turn off both the projector and computer.
•
Use an audio cable without a built-in resistor. Using an audio cable with a built-in
resistor turns down the sound.
•
The built-in speaker is monaural.
• The speaker issues the sound from the equipment to which an audio cable is
connected.
To AUDIO OUT
Connect with an audio cable
(with stereo mini jacks).